Show Port-Security Address - Planet SGS-6341 Series Command Manual

-----------------------------------------------------------------------------------------------------
Max Addresses limit in System:128
Total Addresses in System:2
Displayed information
Security Port
MaxSecurityAddr
CurrentAddr
Security Action
Total Addresses in System
Max Addresses limit in System

13.2.4 show port-security address

Command:
show port-security address [interface <interface-id>]
Function:
Display the secure MAC addresses of the port.
Command mode:
Admin Mode and other configuration Mode.
Parameter:
<interface-id > stands for the port to be displayed.
Usage Guide:
This command displays the secure port MAC address information, if no port is specified, secure
MAC addresses of all ports are displayed.
Example:
Switch#show port-security address interface ethernet 1/0/3
Security Mac Address Table
--------------------------------------------------------------------------------------------------
Vlan Mac Address
1 0000.0000.1111
--------------------------------------------------------------------------------------------------
Total Addresses: 1
Displayed information
Explanation
Is port enabled as a secure port.
The maximum secure MAC address number set for the security port.
The current secure MAC address number of the security port.
The violation mode of the port configuration.
The current secure MAC address number of the system.
The maximum secure MAC address number of the system.
Type
SecureConfigured
Explanation
13-91
Ports
Ethernet1/0/1