Vlan Internal - Planet SGS-6341 Series Command Manual

VLANs.
Parameter:
WORD is the VLAN ID to be created/deleted, valid range is 1 to 4094, connect with ';' and '-'.
Command mode:
Global Mode.
Default:
Only VLAN1 is set by default.
Usage Guide:
VLAN1 is the default VLAN and cannot be configured or deleted by the user. The maximal VLAN
number is 4094. It should be noted that dynamic VLANs learnt by GVRP cannot be deleted by this
command.
Example:
Create VLAN100 and enter the configuration mode for VLAN 100.
Switch(config)#vlan 100
Switch(Config-Vlan100)#

12.1.35 vlan internal

Command:
vlan <2-4094> internal
Function:
Specify the internal VLAN ID. After an ID is specified as the internal VLAN ID, it is not allowed to be
used by other VLAN. Internal VLAN is only used to LOOPBACK interface and can not add physical
port. New internal VLAN ID takes effect after save the configuration and reboot the switch.
Parameter:
<vlan-id>: The ID is specified as internal VLAN ID, the range is 2 to 4094.
Command mode:
Global Mode.
Default:
1006.
Usage Guide:
Set 1006 as the default internal VLAN ID, the internal VLAN ID needs to be modified when the
network set 1006 as VLAN ID. Internal VLAN ID must select an unused ID or else affect other VLAN.
This command takes effect after save the configuration and reboot the switch.
Example:
Set 100 as the internal VLAN ID.
12-70