Show Privilege; Show Temperature; Show Tech-Support - Planet SGS-6341 Series Command Manual

1.1.32 show privilege

Command:
show privilege
Function:
Show privilege of the current users.
Command mode:
All configuration modes
Example:
Show privilege of the current user.
Switch(Config)#show privilege
Current privilege level is 15

1.1.33 show temperature

Command:
show temperature
Function:
Display the current temputerature of the switch CPU.
Command mode:
All mode.
Usage Guide:
This command is used to monitor the temperature of the switch CPU.
Example:
Display the current temperature of the switch CPU.
Switch(Config)#show temperature
Temperature: 47.0625 ℃

1.1.34 show tech-support

Command:
show tech-support [no-more]
Function:
Display the operational information and the task status of the switch. The technique specialist use this command to
diagnose whether the switch operate normally.
Parameter:
no-more: Display the operational information and the task status of the switch directly, do not connect the user by
1-65
SGS-6341 Series Command Guide