Switch(config)#vlan 100 internal
12.1.36 vlan ingress enable
Command:
vlan ingress enable
no vlan ingress enable
Function:
Enable the VLAN ingress rule for a port; the "no vlan ingress enable" command disables the
ingress rule.
Command mode:
Port Mode.
Default:
Enable VLAN ingress filtering function.
Usage Guide:
After VLAN ingress filtering is enabled on the port, when the system receives data it will check
source port first, and forwards the data to the destination port if it is the VLAN member port, or else
drop the data.
Example:
Disable VLAN ingress rules on the port.
Switch(Config-If-Ethernet1/0/1)# no vlan ingress enable
12.1.37 vlan-translation
Command:
vlan-translation <old-vlan-id> to <new-vlan-id> in
no vlan-translation <old-vlan-id> in
Function:
Add VLAN translation by creating a mapping between original VLAN ID and current VLAN ID; the no
form of this command deletes corresponding mapping.
Parameter:
old-vlan-id is the original VLAN ID; new-vlan-id is the translated VLAN ID; in indicates ingress
translation.
Command Mode:
Port Mode.
12-71