Gvrp (Port); No Garp Timer - Planet SGS-6341 Series Command Manual

Command mode:
Global mode
Default:
Disabled.
Usage Guide:
Enable GVRP function globally and only in this way GVRP module can work normally.
Example:
Enable GVRP function globally.
Switch(config)#gvrp

12.1.9 gvrp (Port)

Command:
gvrp
no gvrp
Function:
Enable/disable GVRP function on port. Notice: although GVRP can be enabled on port when GVRP
is not enabled globally, it will not take effect until global GVRP is enabled.
Command mode:
Port mode
Default:
Disabled.
Usage Guide:
GVRP function can only be enabled on trunk and hybrid ports, and enabling GVRP will return an
error on access port. After GVRP enabled on port, this port will be added to GVRP (i.e. adding
corresponding state machine to GVRP of the port).
Example:
Enable GVRP of port.
Switch(config-if-ethernet1/0/1)#gvrp

12.1.10 no garp timer

Command:
no garp timer (join | leave | leaveall)
Function:
Restore garp join | leave | leaveAll timer to the default value.
12-51