Show Ipv6 Interface - Planet SGS-6341 Series Command Manual

0 parameter, 0 timestamp, 0 timestamp replies
TCP statistics:
UDP statistics:

19.2.32 show ipv6 interface

Command:
show ipv6 interface {brief|<interface-name>}
Function:
Show interface IPv6 parameters.
Parameter:
Parameter brief is the brief summarization of IPv6 status and configuration, and parameter
interface-name is Layer 3 interface name.
Command Mode:
Admin and Configuration Mode
Usage Guide:
If only brief is specified, then information of all L3 is displayed, and you can also specify a specific
Layer 3 interface.
Example:
Switch#show ipv6 interface Vlan1
Vlan1 is up, line protocol is up, dev index is 2004
Device flag 0x1203(UP BROADCAST ALLMULTI MULTICAST)
IPv6 is enabled
Link-local address(es):
fe80::203:fff:fe00:10 PERMANENT
Global unicast address(es):
3001::1
Joined group address(es):
ff02::1
ff02::16
ff02::2
ff02::5
ff02::6
ff02::9
ff02::d
ff02::1:ff00:10
ff02::1:ff00:1
TCP packet statistics.
UDP packet statistics.
subnet is 3001::1/64 PERMANENT
19-192