Show Cpu Usage; Show Memory Usage - Planet SGS-6341 Series Command Manual

1.1.30 show cpu usage

Command:
show cpu usage [<slotno>]
Function:
Show CPU usage rate.
Command mode:
Admin and Configuration Mode.
Usage Guide:
Check the current usage of CPU resource by show cpu usage command. Only the chassis switch uses slotno
parameter which is used to show the CPU usage rate of the card on specified slot, if there is no parameter, the
default is current card.
Example:
Show the current usage rate of CPU.
Switch#show cpu usage
Last 5 second CPU IDLE: 87%
Last 30 second CPU IDLE: 89%
Last 5 minute CPU IDLE: 89%
From running CPU IDLE: 89%
Command related:
clock set

1.1.31 show memory usage

Command:
show memory usage [<slotno>]
Function:
Show memory usage rate.
Command mode:
Admin and Configuration Mode.
Usage Guide:
Check the current usage of memory resource by show memory usage command. Only the chassis switch uses
slotno parameter which is used to show the memory usage rate of card on the specified slot, if there is no parameter,
the default is current card.
Example:
Show the current usage rate of the memory.
Switch#show memory usage
The memory total 128 MB, free 58914872 bytes, usage is 56.10%
1-64
SGS-6341 Series Command Guide