Show Ipv6 Ospf Neighbor - Planet SGS-6341 Series Command Manual

Hello due in 00:00:10
Neighbor Count is 1, Adjacent neighbor count is 1

36.33 show ipv6 ospf neighbor

Command:
show ipv6 ospf [<tag>] neighbor [<neighbor_id> | <ifname> detail | detail ]
Function:
Show OSPF adjacent point messages.
Parameter:
<tag> is process tag, which is a character string
<neighbor_id> is the neighbor ID shown in IPv4 address format
detail: Show neighbor details
<ifname> name of the interface
Default:
Not displayed
Command Mode:
All modes
Usage Guide:
OSPF neighbor state can be checked by viewing the output of this command.
Example:
Switch#show ipv6 ospf neighbor
OSPFv3 Process (*null*)
Neighbor ID
192.168.2.3
192.168.2.1
Displayed information
Neighbor ID
Instance ID
Address
Interface
State
Pri
Pri State Dead Time
1 Full/Backup
1 Full/DR
36-254
retransmission.
Numbers of the adjacent layer 3 switch; number of
the layer 3 switches established with neighbor
relation
Interface Instance ID
00:00:29 Vlan1
00:00:38 Vlan2
Explanation
Neighbor ID
Instance ID
IP address of neighboring layer 3 switch
Interface the neighbor belongs
Neighbor relationship state
Priority
0
0 Vlan1