Show Port-Security Interface - Planet SGS-6341 Series Command Manual

Vlan
Mac Address
Type
Ports
Total Addresses

13.2.5 show port-security interface

Command:
show port-security interface <interface-id>
Function:
Display the configuration of secure port.
Command mode:
Admin Mode and other configuration Mode.
Parameter:
<interface-id > stands for the port to be displayed.
Default:
Configuration of secure ports is not displayed by default.
Usage Guide:
This command displays the detailed configuration information for the secure port.
Example:
Switch#show port-security interface ethernet 1/0/1
Port Security: Enabled
Port status: Security Up
Violation mode: Protect
Maximum MAC Addresses: 1
Total MAC Addresses: 1
Configured MAC Addresses: 1
Lock Timer is ShutDown
Mac-Learning function is: Opened
Displayed information
Port Security
Port status
Violation mode
Maximum MAC Addresses
The VLAN ID for the secure MAC Address.
Secure MAC address.
Secure MAC address type.
The port that the secure MAC address belongs to.
Current secure MAC address number in the
system.
Explanation
Is port enabled as a secure port.
Port secure status.
Violation mode set for the port.
The maximum secure MAC address number set
13-92