Show Ip Ospf Interface - Planet SGS-6341 Series Command Manual

22.1.1.0
Link ID
192.168.1.1
Link ID
2.2.2.0
2.2.3.0

35.57 show ip ospf interface

Command:
show ip ospf interface <interface>
Function:
Display the OSPF interface messages.
Parameter:
<interface> is the name of interface
Default:
Not displayed
Command Mode:
Admin and configuration mode
Example:
Switch#show ip ospf interface
Loopback is up, line protocol is up
OSPF not enabled on this interface
Vlan1 is up, line protocol is up
Internet Address 10.10.10.50/24, Area 0.0.0.0
Process ID 0, Router ID 10.10.11.50, Network Type BROADCAST, Cost: 10
Transmit Delay is 5 sec, State Waiting, Priority 1
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 35, Dead 35, Wait 35, Retransmit 5
192.168.1.2 308 0x8000000c 0xc8f0
ASBR-Summary Link States (Area 0.0.0.2)
ADV Router Age Seq#
192.168.1.2 1702 0x8000002a 0x89c7
AS External Link States
ADV Router Age Seq#
192.168.1.1 1499 0x80000056 0x3a63 E2 2.2.2.0/24 [0x0]
192.168.1.1 1103 0x8000002b 0x0ec3 E2 2.2.3.0/24 [0x0]
35-224
22.1.1.0/24
CkSum
CkSum Route