Chapter 45 IPv6 Multicast Protocol
45.1 Public Commands for Multicast
45.1.1 show ipv6 mroute
Command:
show ipv6 mroute [<GroupAddr> [<SourceAddr>]]
Function:
show IPv6 software multicast route table.
Parameter:
GroupAddr: show the multicast entries relative to this Group address.
SourceAddr: show the multicast route entries relative to this source address.
Command Mode:
Admin mode and global mode
Example:
show all entries of IPv6 multicast route table
Switch(config)# show ipv6 mroute
Name: Loopback, Index: 2002, State:49
Name: Vlan1, Index: 2006, State:1043
Name: Vlan11, Index: 2007, State:1043
Name: Vlan12, Index: 2008, State:1043
Name: Tunnel1, Index: 2009, State:d1
Name: Tunnel2, Index: 0, State:0
Name: pim6reg, Index: 2010, State:c1
Name: pimreg, Index: 2011, State:c1
The total matched ip6mr active mfc entries is 1, unresolved ip6mr entries is 1
Group
ff2f::1
ff3f::1
Displayed information
Name
Index
State
The total matched ipmr active mfc entries
Origin
2014:1:2:3::2
2012:1:2:3::2
Iif
Wrong
Tunnel1
NULL
4
Explanation
the name of interface
the index number of interface
the state of interface
The total matched active IP multicast route mfc
45-1
Oif:TTL
0
2008:1
0:0