Show Firewall - Planet SGS-6341 Series Command Manual

IP Ingress access-list used is 100, traffic-statistics Disable.
interface name: Ethernet1/0/2
IP Ingress access-list used is 1, packet(s) number is 11110.
Displayed information
interface name: Ethernet 1/0/1
IP Ingress access-list used is 100
packet(s) number is 11110

47.26 show firewall

Command:
show firewall
Functions:
Reveal configuration information of packet filtering functions.
Command Mode:
Admin and Configuration Mode.
Examples:
Switch#show firewall
Firewall status: Enable
Displayed information
fire wall is enable
47.27 show ipv6 access-lists
Command:
show ipv6 access-lists [<num>|<acl-name>]
Function:
Show the configured IPv6 access control list.
Parameter:
<num> is the number of specific access control list, the valid range is 500～699, amongst 500～599
is digit standard IPv6 ACL number, 600～699 is the digit extended IPv6 ACL number; <acl-name> is
the nomenclature character string of a specific access control list, lengthening within 1～16.
Explanation
Tying situation on port Ethernet1/0/1
No. 100 numeric expansion ACL tied to entrance of port
Ethernet1/0/1
Number of packets matching this ACL rule
Explanation
Packet filtering function enabled
47-28