Mls Qos Internal-Priority - Planet SGS-6341 Series Command Manual

INTP Value 0-7 8-15 16-23 24-31 32-39 40-47 48-55 56-63
QUEUE Value 0 1
INTP Value 64-71 72-79 80-87 88-95 96-103 104-111 112-119
QUEUE Value 0
Command mode:
Global Mode.
Usage Guide:
INTP means the chip internal priority setting. The ingress packets from the port obtain a internal
priority through the mapping, reset the internal priority according to intp-intp or set action in after
QoS policy, and process the egress packets according to the mapping from intp to cos, dscp, queue,
dp.
Example:
Setting the global cos-to-intp mapping.
Switch(config)#mls qos map cos-intp 1 2 3 4 5 6 7 0

15.11 mls qos internal-priority

Command:
mls qos queue algorithm {sp | wdrr}
no mls qos queue algorithm
Function:
After configure this command, the queue management algorithm is set.
Parameters:
sp: The strict priority, the queue number of bigger, then the priority is higher
wdrr: Select wdrr algorithm
Default:
The default queue algorithm is wdrr.
Command mode:
Port Mode.
Usage Guide:
After configure this command, the queue management algorithm is set.
Example:
Setting the queue management algorithm as sp.
Switch(interface-ethernet1/0/1)#mls qos queue algorithm sp
2 3 4 5
1 2 3 4
15-133
6 7
5 6