Mkdir; Pwd - Planet SGS-6341 Series Command Manual

Parameters:
<device> is the name of the device to be formatted.
Command Mode:
Admin Mode.
Default Settings:
None.
Usage Guide:
1. After formatting, all files on the storage device will be irrecoverably lost.
2. The only acceptable file system type of Format is FAT 32, without exception.
3. This command cannot be used to format flash.

2.6 mkdir

Command:
mkdir <directory>
Function:
Create a sub-directory in the designated directory on a certain storage device .
Parameters:
<directory> is the sub-directory name, a sequence of consecutive characters, whose length ranges from 1 to 80.
Command Mode:
Admin Mode.
Default Settings:
None.
Usage Guide:
The new created directory should not be named the same as any other directory or file in the designated directory, or
located on a flash device. If any error occurs, a prompt will be displayed.

2.7 pwd

Command:
pwd
Function:
Display the current working directory.
Command Mode:
Admin Mode.
Default Settings:
The default directory is flash.
2-108
SGS-6341 Series Command Guide