Debug Ethernet-Oam Timer; Ethernet-Oam - Planet SGS-6341 Series Command Manual

11.5 debug ethernet-oam timer

Command:
debug ethernet-oam timer {all | pdu_timer | local_lost_link_timer} [interface {ethernet |}
<IFNAME>]
no debug ethernet-oam timer {all | pdu_timer | local_lost_link_timer} [interface {ethernet | }
<IFNAME>]
Function:
Enable the debugging of refreshing information for specific or all timers, no this command disables
the debugging.
Parameter:
<IFNAME>: name of the port that the debugging will be enabled or disabled
Default:
Disable.
Command Mode:
Admin mode
Example:
Enable the debugging of refreshing information for all timers of ethernet1/0/1.
Switch#debug ethernet-oam timer all interface ethernet1/0/1

11.6 ethernet-oam

Command:
ethernet-oam
no ethernet-oam
Function:
Enable ethernet-oam of ports, no command disables ethernet-oam of ports.
Default:
Disable.
Command Mode:
Port mode
Example:
Enable ethernet-oam of Ethernet 1/0/4.
Switch(config)#interface ethernet 1/0/4
Switch(Config-If-Ethernet1/0/4)#ethernet-oam
11-24