Show Cluster - Planet SGS-6341 Series Command Manual

Enable the debug information; the no command disables the debug switch.
Parameters:
DP: discovery messages.
DR: responsive messages.
CP: command messages.
receive: receive messages.
send: send messages.
Command Mode:
Admin Mode.
Usage Guide:
Enable the debug information of cluster messages. After enabling classification, all DP, DR and CP messages sent
or received in the cluster will be printed.
Example:
Enable the debug information of receiving DP messages.
Switch#debug cluster packets DP receive

3.14 show cluster

Command:
show cluster
Function:
Display cluster information of the switch.
Command Mode:
Admin and Configuration Mode.
Example:
Execute this command on switches of different roles.
----in a commander----------------------------
Switch#show cluster
Status: Enabled
Cluster VLAN: 1
Role:
IP pool:
Cluster name:
Keepalive interval:
Keepalive loss-count: 3
Auto add:
Number of Members:
commander
10.254.254.1
MIS_zebra
30
Disabled
0
3-119
SGS-6341 Series Command Guide