Show Ip Mroute - Planet SGS-6341 Series Command Manual

Chapter 44 IPv4 Multicast Protocol
44.1 Public Commands for Multicast

44.1.1 show ip mroute

Command:
show ip mroute [<GroupAddr> [<SourceAddr>]]
Function:
show IPv4 software multicast route table.
Parameter:
GroupAddr: show the multicast entries relative to this Group address.
SourceAddr: show the multicast route entries relative to this source address.
Command Mode:
Admin mode and global mode
Example:
show all entries of multicast route table.
Switch(config)#show ip mroute
Name: Loopback, Index: 2002, State:49
Name: null0, Index: 2003, State:49
Name: sit0, Index: 2004, State:80
Name: Vlan1, Index: 2005, State:1043
Name: Vlan2, Index: 2006, State:1002
Name: pimreg, Index: 2007, State:c1
The total matched ipmr active mfc entries is 1, unresolved ipmr entries is 0
Group
225.1.1.1
Displayed information
Name
Index
State
The total matched ipmr active mfc entries
unresolved ipmr entries
Group
Origin
Origin Iif
192.168.1.136 vlan1
Wrong
0
Explanation
the name of interface
the index number of interface
the state of interface
The total matched active IP multicast route mfc
（multicast forwarding cache） entries
unresolved ip multicast route entries
the destination address of the entries
the source address of the entries
44-6
Oif:TTL
2006:1