Neighbor Port - Planet SGS-6341 Series Command Manual

no neighbor <ip-address> peer-group <TAG>
Function:
Assign/delete peers in the group. The "no neighbor <ip-address> peer-group <TAG>"command
deletes the peers from the peer group.
Parameter:
<ip-address>: Neighbor IP address.
<TAG>: Name of peer group.
Default:
No peer group.
Command Mode:
BGP route mode and address-family mode
Usage Guide:
By configuring the peer group, a group of peers with the same attributes will be configured at the
same time so to reduce the configuration staff labor. Create peer group with above command and
assign members into the group with this command.
Related Command:
neighbor peer-group (Creating)

37.64 neighbor port

Command:
neighbor <ip-address> port <0-65535>
no neighbor <ip-address> port [<0-65535>]
Function:
Specify the TCP port number of the partner through which the communication carries. The "no
neighbor <ip-address> port [<0-65535>]" command restores the port number to default value.
Parameter:
<ip-address>: Neighbor IP address.
<TAG>: Name of the peer group.
<0-65535>: TCP port number.
Default:
Default port number is 179.
Command Mode:
BGP route mode and address-family mode
Usage Guide:
This is a configuration when the partner may connect through ports not specified by BGP.
Example:
37-300