Show Interface Tunnel - Planet SGS-6341 Series Command Manual

39.9 show gre tunnel
Command:
show gre tunnel {<1-50 |>}
Function:
Display the configuration information of GRE tunnel.
Parameter:
<1-50>: The tunnel ID.
Command mode:
Admin mode and configuration mode.
Example:
Display the configuration information of GRE tunnel.
Switch# show gre tunnel
name
Tunnel1
Tunnel2
Displayed Information
name
mode
source
destination

39.10 show interface tunnel

Command:
show interface tunnel <1-50>
Function:
Display the relative information of the tunnel interface.
Parameter:
<1-50>: The tunnel ID.
Command mode:
Admin mode and configuration mode.
Example:
Display the relative information of the specific tunnel interface. If the specific tunnel is GRE tunnel,
then display the relative information of the specific GRE tunnel interface.
mode
gre ip
gre ipv6 2001::1
source
192.168.1.1
2001::2
Explanation
The tunnel name
The tunnel type
The tunnel source address （IPv4 or IPv6）
The tunnel destination address（IPv4 or IPv6）
39-7
destination
192.168.1.2