Ethernet-Oam Timeout; Show Ethernet-Oam - Planet SGS-6341 Series Command Manual

Normal forwarding will be suspended during the remote-loopback, are you sure to support
remote-loopback? [Y/N]

11.25 ethernet-oam timeout

Command:
ethernet-oam timeout <seconds>
no ethernet-oam timeout
Function:
Configure the timeout of OAM connection, no command restores the default value.
Parameter:
<seconds>, the timeout ranging from 5 to 10 seconds.
Default:
5s.
Command Mode:
Port mode
Usage Guide:
OAM connection will be disconnected if no OAMPDU is received after specified timeout.
Example:
Set the timeout of OAM connection for ethernet 1/0/4 to 6 seconds.
Switch(Config-If-Ethernet1/0/4)#ethernet-oam timeout 6

11.26 show ethernet-oam

Command:
show ethernet-oam [{local | remote} interface {ethernet |} <IFNAME>]
Function:
Show Ethernet OAM connection of specified or all ports.
Parameter:
Overview information of all Ethernet OAM connections will be shown if no parameters is input
local, show detailed information of local OAM connection
remote, show detailed information of remote OAM connection
<IFNAME>, the port that OAM connection information will be shown
Command Mode:
Admin mode
11-37