Policy Aggregate - Planet SGS-6341 Series Command Manual

Example:
In the policy class table configuration mode, set the CIR as 1000, CBS as 2000 and the action when
CIR is exceeded as transmitting the messages after changing intp to 40.
Switch(config)#class-map cm
Switch(config-classmap-cm)#match cos 0
Switch(config-classmap-cm)#exit
Switch(config)#policy-map 1
Switch(config-policymap-1)#class cm
Switch(config-policymap-1-class-cm)#policy 1000 2000 exceed-action set-internal-priority 40

15.17 policy aggregate

Command:
policy aggregate <aggregate-policy-name>
no policy aggregate <aggregate-policy-name>
Function:
Police Map reference aggregate policy, applies an aggregate policy to classified traffic; the no
command deletes the specified aggregate policy.
Parameters:
<aggregate-policy-name> is the policy set name.
Default:
No policy is configured by default.
Command mode:
Policy class map configuration Mode
Usage Guide:
The same policy set can be referred to by different policy class maps.
Example:
Create class-map, the match rule is the cos value is 0; policy-map is 1, enter the policy map mode,
set the Policy and choose the color policy for the current list.
Switch(config)#class-map cm
Switch(config-classmap-cm)#match cos 0
Switch(config-classmap-cm)#exit
Switch(config)#policy-map 1
Switch(config-policymap-1)#class cm
Switch(config-policymap-1-class-cm)#policy aggregate color
15-138