Debug Lldp Packets; Lldp Enable - Planet SGS-6341 Series Command Manual

Example:
Enable the debug switch of LLDP function on the switch.
Switch(config)#debug lldp

8.3 debug lldp packets

Command:
debug lldp packets interface ethernet <IFNAME>
no debug lldp packets interface ethernet <IFNAME>
Function:
Display the message-receiving and message-sending information of LLDP on the port; the no
operation of this command will disable the debug information switch.
Default:
Disable the debug information on the port.
Command Mode:
Admin Mode.
Usage Guide:
When the debug switch is enabled, users can check the receiving and sending of packets and other
information on the port.
Example:
Enable the debug switch of LLDP function on the switch.
Switch(config)# debug lldp packets interface ethernet 1/0/1
%Jan 01 00:02:40 2006 LLDP-PDU-TX

8.4 lldp enable

Command:
lldp enable
lldp disable
Function:
Globally enable LLDP function; disable command globally disables LLDP function.
Default:
Disable LLDP function.
Command Mode:
Global Mode.
PORT= ethernet 1/0/1.
8-2