Show Ipv6 Ospf Route - Planet SGS-6341 Series Command Manual

36.34 show ipv6 ospf route

Command:
show ipv6 ospf [<tag>] route
Function:
Show the OSPF route table messages.
Parameter:
<tag> is the processes tag, which is a character string.
Default:
Not displayed
Command Mode:
All modes
Example:
Destination
Next-hop
O 2000:1:1::/64
directly connected, Vlan2
O 2001:1:1::/64
directly connected, Vlan1
O 3000:1:1::/64
via fe80::203:fff:fe01:429e, Vlan2
O 3003:1:1::/64
via fe80::203:fff:fe01:d28, Vlan1
36.35 show ipv6 ospf redistribute
Command:
show ip ospf v6 [<process-tag>] redistribute
Function:
To display the routing message redistributed from external process of OSPF.
Parameter:
IPv6 OSPF is the tag ID, to display all routing messages redistributed from external process of IPv6
OSPF if there is no parameter.
Command Mode:
Admin Mode and Configuration Mode.
Example:
Metric
10
10
20
20
36-255