Ftp-Server Timeout - Planet SGS-6341 Series Command Manual

Default:
FTP server is not started by default.
Command mode:
Global Mode
Usage Guide:
When FTP server function is enabled, the switch can still perform ftp client functions. FTP server is not started by
default.
Example:
enable FTP server service.
Switch#config
Switch(config)# ftp-server enable
Relative command:
ip ftp

1.5.5 ftp-server timeout

Command:
ftp-server timeout <seconds>
Function:
Set data connection idle time.
Parameter:
<seconds> is the idle time threshold (in seconds) for FTP connection, the valid range is 5 to 3600.
Default:
The system default is 600 seconds.
Command mode:
Global Mode
Usage Guide:
When FTP data connection idle time exceeds this limit, the FTP management connection will be disconnected.
Example:
Modify the idle threshold to 100 seconds.
Switch#config
Switch(config)#ftp-server timeout 100
1-100
SGS-6341 Series Command Guide