Garp Timer Leaveall; Gvrp (Global) - Planet SGS-6341 Series Command Manual

Default:
600 ms.
Usage Guide:
Check whether the value satisfy the range. If so, modify the value of garp timer to the specified
value, otherwise return a configuration error.
Example:
Set the value of garp leave timer as 600ms.
Switch(config)#garp timer leave 600

12.1.7 garp timer leaveall

Command:
garp timer leaveall <5000-60000>
Function:
Set the value of garp leaveAll timer, note that the value of leaveAll timer must be larger than leave
timer.
Parameter:
<5000-60000>, the value of timer in millisecond
Command mode:
Global Mode.
Default:
10000 ms.
Usage Guide:
Check whether the value satisfy the range. If so, modify the value of garp leaveAll timer to the
specified value, otherwise return a configuration error.
Example:
Set the value of garp leaveAll as 20000ms.
Switch(config)#garp timer leaveall 20000

12.1.8 gvrp (Global)

Command:
gvrp
no gvrp
Function:
Enable/disable GVRP funciton globally.
12-50