Ip Dhcp Snooping Binding - Planet SGS-6341 Series Command Manual

30.10 ip dhcp snooping binding

Command:
ip dhcp snooping binding enable
no ip dhcp snooping binding enable
Function:
Enable the DHCP Snooping binding funciton
Command Mode:
Globe mode
Default Settings:
DHCP Snooping binding is disabled by default.
Usage Guide:
When the function is enabled, it will record the binding information allocated by DHCP Server of all
trusted ports. Only after the DHCP SNOOPING function is enabled, the binding function can be
enabled.
Example:
Enable the DHCP Snooping binding funciton.
switch(config)#ip dhcp snooping binding enable
Relative Command:
ip dhcp snooping enable
30.11 ip dhcp snooping binding arp
Command:
ip dhcp snooping binding arp
no ip dhcp snooping binding arp
Function:
Enable the DHCP Snooping binding ARP funciton.
Command Mode:
Globe mode
Default Settings:
DHCP Snooping binding ARP funciton is disabled by default.
Usage Guide:
When this function is enbaled, DHCP SNOOPING will add binding ARP list entries according to
binding information. Only after the binding function is enabled, can the binding ARP function be
enabled. Binding ARP list entries are static entries without configuration of reservation, and will be
30-93