Show Mls Qos Interface - Planet SGS-6341 Series Command Manual

Class map name:c1
policy CIR: 1000 CBS: 1000 PIR: 200 PBS: 3000
conform-action:
transmit
exceed-action:
drop
violate-action:
drop

15.24 show mls qos interface

Command:
show mls qos interface [<interface-id>] [policy | queuing]
Function:
Displays QoS configuration information on a port.
Parameters:
<interface-id> is the port ID; policy is the policy setting on the port; queuing is the queue setting
for the port.
Command mode:
Admin Mode and Common Mode.
Usage Guide:
In single rate single bucket mode, the messages can only red or green when passing police. In dual
bucket mode, there are three colors of messages, they are GREEN, YELLOW, RED.
Example:
Switch #show mls qos interface ethernet 1/0/1
Ethernet 1/0/1
Default COS: 0
Default int-Prio: 0
Trust: COS DSCP
Pass-through-cos: NONE
Pass-through-dscp: NONE
Attached Policy Map for Ingress: 1
Classmap
1
Display Information
classified green
4509799 6769
15-143
Name of the class map referred to
Policy implemented
yellow red (in packets)
0 4503030
Explanation