Show Cluster Candidates - Planet SGS-6341 Series Command Manual

Switch#show cluster members
Member From : User config(U); Auto member (A)
ID From Status
--- - ----------- ----------------- ------------ ------------ ---------------
xxx x xxxxxxxxxx12 xx-xx-xx-xx-xx-xx xxxxxxxxxx12 xxxxxxxxxx12 xxx.xxx.xxx.xxx
1 U Inactive
2 A Active
3 U Active
4 A Inactive
----
Switch#show cluster members id 1
Cluster Members:
ID: 1
Member status: Inactive member (user_config)
IP Address: 10.254.254.2
MAC Address: 00-01-02-03-04-06
Description: SGS-6341-24T4X
Hostname: DSW102

3.16 show cluster candidates

Command:
show cluster candidates [nodes-sn <candidate-sn-list> | mac-address <mac-addr>]
Function:
Display the statistic information of the candidate member switches on the command switch
Parameter:
candidate-sn-list：candidate switch sn, ranging from 1 to 256. More than one switch can be specified.
mac-address： mac address of the candidate switch
Default:
No parameters means to display information of all member switches.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Executing this command on the switch will display the information of the candidate member switches.
Example:
Display configuration information of all cluster candidate switches.
Switch#show cluster candidates
Cluster Candidates:
Mac Hostname
00-01-02-03-04-05 MIS_zebra
00-01-02-03-04-05 MIS_bison
00-01-02-03-04-05 SRD_jaguar
00-01-02-03-04-05 HRD_puma
Description Internal IP
SGS-6341-24T4X
SGS-6341-24T4X
SGS-6341-24T4X
SGS-6341-24T4X
3-121
SGS-6341 Series Command Guide
10.254.254.2
10.254.254.3
10.254.254.4
10.254.254.5