Lldp Med Network-Policy - Planet WGSW-28040 Command Manual

4.13.14 lldp med network-policy

Command:
lldp med network-policy <1-32> app
(voice|voice-signaling|guest-voice|guest-voice-signaling|softphone-voice|
video-conferencing|streaming-video|video-signaling) vlan <1-4094> vlan-type
(tag|untag) priority <0-7> dscp <0-63>
no lldp med network-policy <1-32>
Parameter:
<1-32>
(voice|voice-signali
ng|guest-voice|gue
st-voice-signaling|s
oftphone-voice|
video-conferencing
|streaming-video|vi
deo-signaling)
<1-4094>
(tag|untag)
<0-7>
<0-63>
Mode:
Global Configuration
Usage Guide:
The commands globally configures the LLDP MED network policy table. The "lldp med network-policy" command
created a network policy entry that can be bind to ports. If LLDP MED network policy voice auto mode is enabled,
"voice" type network policy can not be created since it is in auto mode. The "no lldp med network-policy" command
clear the network policy entry of the specified index. A network policy can be cleared only when it is not bind to any
port. The network policy table configuration could be shown by "show lldp med" command.
Example:
This example create 2 network policies.
Switch(config)# aaa authentication login test1 tacacs+ radius local
Switch(config)# lldp med network-policy 1 app voice-signaling vlan 2 vlan-type tag
Specify the network policy index
Specify the network policy application type.
Specify the VLAN ID
Specify the VLAN tag status
Specify the L2 priority
Specify the DSCP value
Command Guide of WGSW-28040
187