Data-Flow-Format (Radius Scheme View) - HP FlexNetwork 7500 Series Command Reference Manual

port

data-flow-format (RADIUS scheme view)

Use data-flow-format to set the data flow and packet measurement units for traffic statistics.
Use undo data-flow-format to restore the default.
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet |
kilo-packet | mega-packet | one-packet } } *
undo data-flow-format { data | packet }
Default
Traffic is counted in bytes and packets.
Views
RADIUS scheme view
Predefined user roles
network-admin
mdc-admin
Parameters
data: Specifies the unit for data flows.
byte: Specifies the unit as byte.
giga-byte: Specifies the unit as gigabyte.
kilo-byte: Specifies the unit as kilobyte.
mega-byte: Specifies the unit as megabyte.
packet: Specifies the unit for data packets.
giga-packet: Specifies the unit as giga-packet.
kilo-packet: Specifies the unit as kilo-packet.
mega-packet: Specifies the unit as mega-packet.
one-packet: Specifies the unit as one-packet.
Usage guidelines
The data flow and packet measurement units for traffic statistics must be the same as configured on
the RADIUS accounting servers. Otherwise, accounting results might be incorrect.
Examples
# In RADIUS scheme radius1, set the data flow and packet measurement units for traffic statistics to
kilobyte and kilo-packet, respectively.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet
Related commands
display radius scheme
78