ENGINE INSTALLATION
Check the engine mount rubbers for damage or wear
and replace if
necessary.
Install the engine mount rubbers.
Engine installation is essentially the reverse of
removal.
Use a floor jack or other adjustable support to
carefully manuever the engine into place.
CAUTION:
Carefully align mounting points with the jack
to prevent damage to mounting bolt threads
and wire harness and cables.
Tighten all fasteners to the torque values given on
page 5-1.
NOTE
• Route the wires and cables prope,rly (page
1·9).
Fill the crankcase to the proper level with
the recommended
oil
(page 2-1).
•
Fill the cooling system (page 6 ·3).
• Perform the following inspection and ad-
justments:
Throttle operation (page 3-6)
.
Clutch (page 3-20}.
ENGINE REMOVAL/INSTALLATION
5-5