Honda V65 Magna-VF1100C 1983 Shop Manual page 111

CLUTCH
PISTON 0.0. INSPECTION
Check the piston for scoring or scratches.
Measure the outside diameter of the piston with a
m icrometer.
SERVICE LIMIT: 38.02 mm (1.497 in)
CYLINDER 1.0. INSPECTION
Check the slave cylinder for scoring or scratches.
Measure the inside diameter of the cylinder bore.
SERVICE LIMIT: 38.18 mm (1.503 in)
ASSEMBLY
Assemble the slave cylinder in the reverse order of
disassembly. The oil seals must
be
replaced w ith
new ones whenever they have been removed.
Lubricate the piston and piston seal with a medium
grade of Hi-Temperature silicone grease or brake
fluid before assembly.
Be certain the piston seal is seated in the piston
groove.
Place the piston in the cylinder with the oil seal
end facing out.
7-10
OIL SEAL
AFTER '85 :
- a
-l
L~_·
PISTON SEAL
PISTON
SILICONE INSULLOR
r ,
GREASE SLAVE CYLINDER BODY