Honda V65 Magna-VF1100C 1983 Shop Manual page 71

Reconnect the throttle linkage between the No. 1
and No. 2 carburetors, using new cotter pins.
Coat new 0-rings with oil and install them on the
fuel and air joint pipes.
Put the No. 3 and No. 4 carburetors together with
the joint pipes.
Loosen the synchronization adjusting screws until
there is no tension.
Install the synchronization springs.
Install the thrust springs between the throttle valve
shafts.
FUE L SYSTEM
THROTTLE LINK
No. 2 CARBURETOR
COTTER PINS No.1 CARBU RETOR
FUEL JO INT PIPE
AIR JO INT PIPES
THRUST SPRING No.3 CARBUR ETOR
No.3 SYNCHRO NI ZATI ON SPR ING
4-13