Honda V65 Magna-VF1100C 1983 Shop Manual page 219

PINION BEARING REMOVAL
Remove the 0-ring from the pinion shaft.
Pull the outer and inner bearing races off the shaft
with the bearing puller.
Pull the remaining inner race off with the same tool.
Remove the pinion adjustment spacer.
PINION RETAINER OIL SEAL
REPLACEMENT
Remove the 0 -ring and oil seal from the pinion
retainer.
Drive a new oil seal into the retainer.
Coat a new 0 -ring with oil and install it onto the
retainer.
To install new oil seal, use driver 07945-3330300.
PINION BEARING
OIL SEAL
DR IVE TRAIN
0-RING
BEARING
PULLER
(COMMERCIALLY AVAILABLE)
DRIVER
07749-0010000
14-9