TRANSMISSION
Remove the
countershaft
bearing holder bolts and
holder from the
case.
Remove the output drive gear and shim.
Place the countershaft/holder in a press.
Press the countershaft out of the bearing holder.
COUNTERSHAFT BEARING
REPLACEMENT
NOTE
:
The
oountershaft
must be removed before
replacing
bearing.
Place the bearing holder in a vise with soft jaws
or shop towel.
NOTE:
Do not damage the bearing holder, especially
the crankcase mating surface.
Unstake
the
outer race lock nut with a punch.
Remove
the bearing outer race lock
nut with a
special tool. Discard
the
lock nut.
13-6
,,