Honda V65 Magna-VF1100C 1983 Shop Manual page 121

CLUTCH
Coat the discs and plates with clean engine oil.
Install the clutch discs and plates as shown.
CAUTION:
Do not pull clutch center Bout after installing
the discs and plates or a plate with fall bet-
ween clutch centers A and B.
This will prevent the clutch from disengaging.
Install the clutch pressure plate.
Install the clutch spring set plate, clutch spring, and
washers.
NOTE:
Install the clutch spring with the dished face
towards the inside.
Install the lock washer with its "OUTSIDE" mark
facing out.
Install the lock nut.
7-20
LOCK
WASHER
WASHER