Honda V65 Magna-VF1100C 1983 Shop Manual page 28

StiJrt the engine and check the oil pressure at 5,000
rpm.
OIL PRESSURE :
5.4
±
0.7 kg/cm
2
(77
±
10
psi)
at 5,000 rpm
(80° C/176° F)
Stop the engine.
Apply 3·BOND® sealant or equivalent to the
pressure switch threads and install.
TORQUE : 10- 14 N·m (1.0- 1.4 kg-m, 7-10 ft-lb)
Connect the oil pressure switch w ire.
Start the engine.
Operate the warning indicator switch.
Check that the oil pressure warning indicator goes
out after one or two seco1.ds.
If the oil pressure warning ind icator stays on, stop
the engine immediately and determine the cause.
OIL PUMP
REMOVAL
NOTE:
The oil pump can be removed w ith t he engine
mounted in the frame.
Drain the engine oil. Remove the exhaust system.
Remove the right side cover.
Remove the oil pump driven sprocket by removing
the bolt and washer.
Remove the water pump assembly (page 6-1 0).
Remove the oil strainer (page 2-4) and the oil
pass pipe.
Make sure the 0 -rings are in good condition.
LUBRICATION
O IL PRESSURE GAUGE
07506-3000000
PR
ATIACHMENT 07510-4220100
OIL PASS PIPE
0 -RINGS
2-5