Remove
the
handlebar
cover.
Remove the handlebar upper holder bolts,
handle·
bar
upper holder and handlebar.
INSTALLATION
Place the
handlebar
on the lower holder aligning the
punch mark with the upper face of the lower
holder.
Place the upper holders
on
the handlebar
with the
punch marks facing forward.
Tighten the forward bolts first, then
tighten the
rear bolts.
TORQUE:
40-50 N·m (4.0-5.0 k
g-m, 29-36 ft-lb)
Install the
bolt caps.
FRONT WHEE L/SUSPENSION
HANDLEBAR UPPER HOLDER
H
AND LEBAR UPPER HOLDER
15-17