Honda V65 Magna-VF1100C 1983 Shop Manual page 196

TRANSMISSION
Remove the shim and 0-ring from the bearing
holder.
OUTPUT DRIVEN GEAR BEARING
REPLACEMENT
Place the output driven gear bearing holder into a
vise with soft jaws. Unstake and remove the output
driven gear bearing outer race lock nut from the
holder.
Press the output driven gear from the holder.
Place the bearing holder in a press and press the
bearing out.
NOTE :
Be careful not to damage the bearing holder
gear case mating surface.
13-10
0-RING
SHIM
DRIVER
07749-0010000
BEARING HOLDER
PILOT,
30
mm
077 46-0040700