Honda V65 Magna-VF1100C 1983 Shop Manual page 264

FRONT WHEEL/SUSPENSION
Insert the rebound spring and piston into the fork
tube.
On the left fork, install the spring seat, valve spring,
oil lock valve, and circlip on the piston.
Place the oil lock piece on the end of the piston
and insert the fork tube into the slider.
Place the fork slider in a vise with soft jaws or a
shop towel.
Apply a locking agent to the socket bolt and thread
it into the piston. Tighten with a
6
mm hex wrench.
NOTE :
Temporarily install the fork spring and fork
tube cap to tighten the socket bolt.
TORQUE: 15-25 N·m (1.5-2.5 kg·m, 11-18 ft-lb)
Place the slider bushing over the fork tube and rest
it on the slider. Put the back-up ring and an old
bushing or equivalent tool on top.
Drive the bushing into place with the seal driver and
remove the old bushing or equivalent tool.
Coat a new oil seal with ATF and install it with
the seal markings facing up. Drive the seal in with
the seal driver.
15-34
CIRCLIP OIL LOCK VALVE
HEX WRENCH, 6 mm 07917-3230000
OR COMMERCIA
Y
AVAILABLE IN U.S.A.
FORK SEAL DRIVER
07947-KA50100
FORK SEAL DRIVER ATTACHMENT
07947-KF00100
VALVE SPRING