FRONT WHEEL/SUSPENSION
Measure between the outside surface of the right
.,.,....
brake disc and the inside of the right caliper holder
with a 0. 7 mm (0.028 in) fee ler gauge.
If the gauge cannot be inserted, pull the right fork
out until the gauge can be inserted.
Tighten the axle pinch bolt to the specified torque.
TORQUE
: 18-
30 N·m
(1.8-
3.0
kg·m,
13-22 ft·lb)
There should still be at least 0.7 mm (0.028 in)
clearance between the caliper holder and disc.
CAUT
ION:
After installing the wheel, apply the brakes
several times and recheck the clearance on
both sides. Failure to provide clearance
will
damage the brake discs and affect braking
efficiency.
Install the speedometer cable.
15-24