Honda V65 Magna-VF1100C 1983 Shop Manual page 344

SWITCHES
CONTROL UNI T INSPECTION
Turn the handlebar right and left.
Check the angle sensor support and control unit for
wear, damage, or looseness.
Remove the coupler box cover (page15·3).
Turn the ignition switch ON.
Check the voltage between the blue/black and green
wire terminals of the control unit wire coupler.
VOLTAGE: SV min.
Turn the turn signal switch to the left or right
position.
The voltmeter reading should drop from 8V to 1 V.
Push the turn signal switch.
The voltmeter reading should rise from 1 V to 8V.
21-16
'83, '84. '85: After '85:
CONTROL UNIT COUPLER
TURN SIGNAL CANCEL UNIT
G-rtlo]
sutsl_jioo