Honda V65 Magna-VF1100C 1983 Shop Manual page 153

CYLINDER HEAD ASSEMBLY
NOTE:
Install new valve stem seals when assembling.
Use valve guide driver 07742-0010100.
Lubricate each valve stem with molybdenum
disulfide grease and insert the valve into the valve
guide. To avoid damage to the stem seal, turn the
valve slowly when inserting.
Install the valve springs and retainers. The springs
tightly wound coils should face toward the head.
Install the valve cotters.
CAUTION:
To prevent loss of tension, do not com-
press the valve spring more than necessary
to install the valve keepers.
Position the large retainer on the compres-
sor attachment, so the compressor
will
not
touch the cylinder head.
Tap the valve stems gently with a soft hammer to
firmly seat the cotters.
NOTE:
Support the cylinder head above the work
bench surface to prevent possible valve
damage.
------------------------~
CYLINDER HEAD/ VALVE
VALVE SPRING COMPRESSOR
07757-0010000
I
RETAINER
VALVE COTTERS
10-15