Honda V65 Magna-VF1100C 1983 Shop Manual page 155

Install the cylinder head and temporarily install the
cylinder head bolts.
NOTE :
Do not tighten the cylinder head bolts at this
time.
With the cam chain tensioner raised in the direction
of the arrow, insert a pin or piece of wire through
the hole in the tensioner base and tensioner.
Pass the cam chain through the cam chain tensioner
and install the tensioner slipper as shown.
NOTE:
Check that the lower end of the slipper fits
in the slipper base correctly.
CYLINDER HEAD/ VALVE
TENSIONER BASE HOLE
\
r
TENSIONER
TENSIONER BASE
TENSION ER SLIPPER
CLIP
PIN
10-17