Honda V65 Magna-VF1100C 1983 Shop Manual page 131

Assemble the gearshift spindle and return spring and
install as shown.
Install the washer, drum stopper arm, collar, spring,
washer,and nut over the arm bolt.
Tighten the nut securely.
Rotate the gearshift spindle and check the linkage
for smooth operation.
Install the oil pump drive sprocket washer on the
shaft.
Install the oil pump drive and driven sprockets
with drive chain and tighten the driven sprocket
bolt securely.
NOTE:
The driven sprocket has an "IN" mark that
must face the crankcase.
Install the clutch assembly and cover (section 7).
GEA RSHIFT LINKAG E
RETURN SPRING GEARSHIFT SPINDLE
DRUM STOPPER ARM
DRIVEN SPROCKET BOLT
8-5