Honda V65 Magna-VF1100C 1983 Shop Manual page 145

Remove the camshaft holders and measure the
width of each plastigauge. The widest thickness
determines the oil clearance.
SERVICE LIMITS :
CENTER : 0 .095 mm (0 .0037 in)
BOTH ENDS: 0.095 mm (0.0037 in)
When the service limits are exceeded, replace
the camshaft and recheck the oil clearance.
Replace the cyl inder head and camshaft holders
if the clearance still exceeds service limits.
CYLINDER HEAD REMOVAL
Loosen the water hose clamp.
Remove the water pipes and hose.
Remove the water pipe O·rings.
Remove the oil pipe and sealing washers.
Remove the f ront and rear cam chain tensioner
base mounting bolts.
Pull the cam chain tensioner base up.
CYLINDER HEAD/ VALVE
WATER HOSE
PIPES OIL PIPE
10-7