Honda V65 Magna-VF1100C 1983 Shop Manual page 33

LUBRICATION
FINAL DRIVE OIL
CHECK
Place the motorcycle on its center stand on level
ground.
Remove the oil filler cap.
Check that the oil level reaches the lower edge of
the oil filler cap hole.
Check for leaks, if the level is low. Pour fresh oil
through the oil filler hose until it reaches the lower
edge.
CHANGE
Remove the oil filler cap and drain bolt to drain all
oil from the final gear case.
Install the drain bolt securely.
Fill the gear case with the recommended oil up to
the correct level (above).
OIL CAPACITY : 130 cc (4 .4 oz)
RECOMMENDED OIL :
'83:
HYPOID GEAR 01 L API,
GL-5 SAE #90 (Above 5°C/41°F)
SAE
# 80
(Below 5°C/41°F)
After '83:
HYPOID GEAR OIL: SAE #80
CONTROL CABLE LUBRICATION
Periodically, disconnect the thrc:fttle cables at their
upper ends. Thoroughly lubricate the cables and
their pivot points with a commercially available
cable lubricant or a light weight oil.
2-10
OI L FILLER CAP
OIL LEVEL