Honda V65 Magna-VF1100C 1983 Shop Manual page 340

SWITCHES
Remove the angle sensor (page 21 · 11 ).
Measure the resistance between the B/Y and the
G/W leads.
RESISTANCE: 10-19 k ohms
Check the resistance between the W and G/W leads
while turning the sensor arm slowly from the left
to the right. The resistance should increase
smoothly.
TURN SIGNA L SWITCH
Disconnect the cancel unit coupler.
Turn the turn signal switch to the left position
and connect a jumper wire to the B/Bk and Br/B
leads.
The turn signal switch should return to the neutral
position.
Perform the same test for the right turn position.
SPEED SENSOR
Disconnect the cancel unit coupler,
Check for continuity between the W/Bk and the
G lead terminals at the wire harness coupler
whil~
turning the front wheel slowly.
RESISTANCE: 0 ,..
oo
Alternately
21-12
1±1
·n