Honda V65 Magna-VF1100C 1983 Shop Manual page 245

Connect the choke cable to the choke lever.
Install the clutch master cylinder.
Align the end of the holder with the punch mark
on the handlebar.
T ighten the upper bolt first, then tighten the lower
bolt.
TORQUE : 10- 14 N·m (1.0-1.4 kg·m, 7- 10ft-lb)
Connect the clutch screw wires.
AFTER '85:
REMOVA L/INSTALLATION
Disconnect the clutch switch wires.
Remove
the clutch master cylinder ('83-'85 as
shown).
Remove the two screws and open the left switch.
FRONT WHEEL/SUSPENSION
CHOKE LEVER
CHOKE CABLE
15-15