Monitor With Large Characters - Omron RX2 Series User Manual

Set-up procedure
PID1 output monitor
FA-01
Precautions for Correct Use
What is displayed on the upper monitor of the setting screen "Concurrent monitor" (H03) is the
Same as that displayed on the first line of three-line monitor screen (H01) and the screen with
large characters(H04).
3-3-3

Monitor with Large Characters

In the monitor screen with large characters, you can display a parameter in bigger size.
On the screen that is displayed upon power-on
using the right and left (
to "H04".
And later operate the device in the following proce-
dures.
Example) Change the output frequency monitor to the integrated input power monitor.
Set-up procedure
dA-01
Output Frequency
dA-32
Integrated Input Power
Precautions for Correct Use
What is monitored on the screen with large characters (H04) is the same as the upper monitor
of the setting screen (H03) and the first line of three-line monitor screen (H01).
High-function General-purpose Inverter RX2 Series User's Manual
0.00 Hz
0.00 Hz
[0.00-60.00]
) keys, naviate
0.00
Hz
11.9
kWh
Action
Press the Enter key to confirm the monitoring target, which is
then displayed in the upper section.
Press the F1(1) key to return to the monitor.
You can also configure parameters using the up and down
( ) keys.
STOP
dA-01
Output Frequency
Menu oFW
Action
When the Enter key is pressed, the left-most letter of the
parameter can be changed.
Using the arrow (
[dA-01] to [dA-32]. Press the Enter key to confirm and return
to the monitor.
3 Operation
H04
M1
0.00
Hz
Optional
60.00Hz
device
) keys, change
3 - 23
3